11-11
Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
Entry Screens
Lower-case Letter Entry Screen
Keyboard Layout
"QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Select the
[System Menu/Counter] key, [Common Settings] and then [Keyboard Layout] to choose the desired layout.
"QWERTY" layout is used here as an example. You may use another layout following the same steps.
No. Display/Key Description
1 Display Displays entered characters.
2 Keyboard Select the character to enter.
3 [Cancel] Select to cancel entered characters and return to the screen before
the entry was made.
4 [< Back] Select to return to the previous screen.
5 [OK] / [Next >] Select to save the entered characters and move to the next screen.
6 Enter Key Select to enter a line break.
7 Space Key Select to insert a space.
8 Delete Key Select to delete a character to the left of the cursor.
9 [Input] / [Limit]
Display
Displays maximum number of characters and the number of
characters entered.
10 Cursor Key Select to move the cursor on the display.
11 [A/a] / [a/A] Select to switch between upper case and lower case.
12 [ABC] / [Symbol] Select the characters that are entered. To enter symbols or numbers,
select [Symbol].
Input:
Limit:
< Back Next >Cancel
Add - Name
poitrq
l
uyew
kgfajhds
.vc@xz
Abc
Del.
3
32
A/a
mnb
ABC
To Next Page
Loading...
Need help?
General
Weight and Dimensions
