Kyocera ECOSYS M3660idn

8-36
Setup and Registration (System Menu) > System Menu
eSCL -
Protocol Setting Selects whether to receive scanned documents using eSCL.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
eSCL over SSL -
Protocol Setting Selects whether to receive scanned documents using eSCL over SSL.
*1, *3
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
REST -
Protocol Setting Select whether to use REST.
*1
Value: Off, On
Port Number Set the REST default Port Number. The default port number is 9080.
*1
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
Item Description