Kyocera ECOSYS M6026cidn

2PX/2PY
2-3-23
YC5 1 GND - - Ground
Connected to
drum PWB Y
2 EECLK O 0/3.3 V DC (pulse) EEPROM clock signal
3 ERASEYDR O 0/24 V DC CL-Y: On/Off
4 EEDATA I/O 0/3.3 V DC (pulse) EEPROM data signal
5 N.C. - - Not used
6 +3.3V2 O 3.3 V DC 3.3 V DC power to DRPWB-Y
7 DA0 - - Ground
8 DA1 - - Ground
YC6 1 GND - - Ground
Connected to
developing
PWB K
2 TNSENK I Analog TS-K detection voltage
3 +3.3V2 O 3.3 V DC 3.3 V DC power to DEVPWB-K
4 DLPTHERM I Analog DEVTH detection voltage
YC7 1 GND - - Ground
Connected to
developing
PWB M
2 TNSENM I Analog TS-M detection voltage
3 +3.3V2 O 3.3 V DC 3.3 V DC power to DEVPWB-M
4 N.C. - - Not used
YC10 1 GND - - Ground
Connected to
developing
PWB C
2 TNSENC I Analog TS-C detection voltage
3 +3.3V2 O 3.3 V DC 3.3 V DC power to DEVPWB-C
4 N.C. - - Not used
YC13 1 GND - - Ground
Connected to
developing
PWB Y
2 TNSENY I Analog TS-Y detection voltage
3 +3.3V2 O 3.3 V DC 3.3 V DC power to DEVPWB-Y
4 N.C. - - Not used
Connector Pin Signal I/O Voltage Description