EasyManuals Logo

Kyocera ECOSYS M6026cidn User Manual

Kyocera ECOSYS M6026cidn
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
2PX/2PY
1-4-29
(3) A specific color is printed solid.
(4) The back side gets dirty.
(5) Image is too light.
Print example Causes Check procedures/corrective measures
Defective charger roller unit
which corresponds to the
color causing the problem.
Replace the drum unit for the color that causes an error
(see page 1-5-21).
Laser of laser scanner unit for
solid color printing is ON.
Defective laser scanner unit.
Replace the laser scanner unit KM/CY
(see page 1-5-45).
Print example Causes Check procedures/corrective measures
Dirty secondary transfer roller. Clean the secondary transfer roller.
Dirty paper conveying path. Clean the paper conveying path.
Dirty heat roller and press
roller.
Clean the heat roller and press roller.
Print example Causes Check procedures/corrective measures
Defective
developing
bias output.
Defective developing unit. Replace the developing unit for the color that
causes an error (see page 1-5-19).
Defective high voltage
PWB.
Replace the high voltage PWB
(see page 1-5-35).
Defective engine PWB. Replace the engine PWB (see page 1-5-27).
Defective drum unit. Decrease the surface potential by performing
the main charger adjustment (see page 1-3-
92).
When the problem is not cleared, replace the
drum unit (see page 1-5-21).
Defective
transfer
bias output.
Defective high voltage
PWB.
Replace the high voltage PWB (see page 1-5-
35).
Defective engine PWB. Replace the engine (see page 1-5-27).
Defective color calibration. Perform the color calibration (Refer to opera-
tion guide).
Insufficient toner. If the display shows the message requesting
toner replenishment, replace the container.
Insufficient agitation of toner container. Shake the toner container vertically approxi-
mately 10 times.
Paper damp. Check the paper storage conditions, replace
the paper.

Table of Contents

Other manuals for Kyocera ECOSYS M6026cidn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M6026cidn and is the answer not in the manual?

Kyocera ECOSYS M6026cidn Specifications

General IconGeneral
Printer TypeColor Laser
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Standard Paper Capacity250 sheets
Operating Systems SupportedWindows, Mac OS, Linux
Processor1 GHz
Memory (Standard)512 MB
Hard Disk DriveOptional
Input Capacity (Standard)250 sheets
Output Capacity150 sheets
Copy Resolution600 x 600 dpi
Maximum Copies999 copies
Scan Resolution600 x 600 dpi
Scan Speed (Black)26 ipm
Scan Speed (Color)26 ipm
Scan FeaturesScan to Email, Scan to USB, Scan to Network
Fax Modem Speed33.6 Kbps
Fax Transmission Speed3 seconds per page
InterfaceUSB 2.0, Ethernet, Wi-Fi
Print Speed (Black)26 ppm
Print Speed (Color)26 ppm
ConnectivityUSB, Ethernet
Duplex PrintingStandard
Mobile PrintingApple AirPrint
Input Capacity (Maximum)800 sheets
Supported Paper SizesA4, A5, Letter, Legal
Paper Weight60 to 220 g/m²
Duplex UnitStandard
Copy Speed (Black)26 cpm
Copy Speed (Color)26 cpm
Zoom Range25% to 400%
Fax CompatibilitySuper G3
Fax Resolution200 x 200 dpi
Network ProtocolsTCP/IP, IPv4, IPv6
Dimensions417 x 429 x 495 mm
Weight26 kg
Display4.3" Touch Screen

Related product manuals