5-7
Operation on the Machine > Favorites
Registering Favorite
When registering a favorite, you can choose from two methods for calling it up:
• Wizard mode: Registered settings are called up in order and configured as you check or change each one.
• Program mode: Settings are called up immediately when you select the key to which they are registered.
Sending is explained as an example below.
Wizard Mode
1
Display the screen.
Select [
Favorites
] on the Home screen.
2
Register the favorite.
1
[
Menu
] > [
Add
]
2
Select the job type.
3
Select [
Wizard
].
4
Select the recall function > [
Next
]
5
Enter the new favorite name > [
Next
]
Scan to E-mail (Address
Book)
Use this when you want to send the image to an
E-mail address registered in the Address Book.
The settings such as the destination and color
selection can be set by following the screen.
• Sending Functions
• Wizard mode
• Destination: Address Book
Color Selection: [Full Color]
File Name Entry: Default
File Format: [PDF]
Continuous Scan: [Off]
Scan Resolution: [300×300 dpi]
E-mail subject: Default
E-mail body: Default
When the job type is "Copy", the Destination Recall Method screen will not be displayed.
Character Entry Method (page 11-11)
Favorites Name Description Default Registration
To Next Page
Loading...
