EasyManua.ls Logo

Kyocera ECOSYS M6035cidn

Kyocera ECOSYS M6035cidn
433 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-13
Troubleshooting > Troubleshooting
Irregular horizontal lines
appear in the image.
Select the [
System Menu/Counter
] key
> [
Adjustment/Maintenance
] >
[
Service Setting
] > [
MC
] and increase
the adjustment value. Increase the
adjustment value 1 level at a time from
the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
The altitude is 1000 m or
higher and irregular
horizontal white lines appear
in the image.
Select the [
System Menu/Counter
] key
> [
Adjustment/Maintenance
] >
[
Service Setting
] > [
Altitude
Adjustment
], and set to an elevation
one level higher than the current setting.
The altitude is 1000 m or
higher and dots appear in
the image.
Select the [
System Menu/Counter
] key
> [
Adjustment/Maintenance
] >
[
Service Setting
] > [
Altitude
Adjustment
], and set to an elevation
one level higher than the current setting.
Paper often jams. Is the paper loaded correctly? Load the paper correctly. page 3-2
Is the paper of the supported type? Is it
in good condition?
Remove the paper, turn it over, and
reload it.
page 3-4
Is the paper curled, folded or wrinkled? Replace the paper with new paper. page 3-4
Are there any loose scraps or jammed
paper in the machine?
Remove any jammed paper. page 10-35
2 or more sheets are
overlaps when ejected.
(multi feed)
Load the paper correctly. page 3-2
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
Symptom Checkpoints Corrective Actions
Reference
Page

Table of Contents

Related product manuals