10-31
Troubleshooting > Troubleshooting
2
[
Normal
] > [
Registration
]
3
Select the chart to be corrected.
4
Select [+] or [-] to enter the values read from the chart.
Select [+] to increase the value from 0 to 9. To decrease, select [-].
By selecting [-], the value changes from 0 to alphabetic letters, going from A to I. To move in the
reverse direction, select [+].
You cannot use the numeric keys to enter these values.
5
Repeat steps 3 to 4 to enter the registration values for each chart.
6
Select [
Start
] after all values have been entered. Color registration begins.
7
Select [
OK
] after color registration is complete.
To Next Page
Loading...
