8-45
Setup and Registration (System Menu) > System Menu
Job Name Set whether the job name set in the printer driver is displayed.
Value: Off, On
When selecting [On], select the job name to be displayed from [Job Name], [Job No.+Job
Name], or [Job Name+Job No.].
User Name Set whether the user name set in the printer driver is displayed.
Value: Off, On
MP Tray Priority If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in
the paper feed.
Value
Off: The printer driver settings are followed.
Auto Feed: If Auto is selected in the printer driver and there is paper in the MP tray
then the paper feed will be from the MP tray.
Always: If there is paper in the MP tray then the paper feed will be from the MP tray
regardless of what is set in the printer driver.
Paper Feed Mode While printing from the computer, select how to feed paper when the paper source and
type are specified.
Value
Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.
Auto Cass.Change Select the following actions when the paper runs out in the paper source while printing.
Value: Off, On
When selecting [Off], the machine displays "Load paper in cassette #." (# is a cassette
number) or "Load paper in MP Tray", and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other paper source, select [Paper]. Select the desired paper source, and
then select the [OK] key.
When selecting [On], the machine continues printing automatically when the other
cassette contains the same paper as the currently-used cassette.
Resolution Set the resolution used for printing.
Value: 300dpi, 600dpi, Fine1200, Fast1200
Settings that are received from the printer driver have priority over the operation panel
settings.
KIR The machine is equipped with the smoothing function, which realizes an excellent
printing of about 9600 dpi (600 dpi × 15 gradation) × 600 dpi.
Value: Off, On
Job Terminator Set the condition to be regarded as the job end if the print job has not been processed to the
end due to the usage environment or for other reasons.
Value:
EOJ (End of Job): Up to the detection of a command indicating the end of job data is
regarded as one job.
End of Session: Data contained in one session of network connection is regarded as
one job.
UEL (Universal Exit Language): Up to detection of UEL at the end of the job is
regarded as one job.
Item Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
