8-8
Setup and Registration (System Menu) > System Menu
Energy Saver/Timer
[Home] key > [...] > [System Menu] > [Device Settings] > [Energy Saver/Timer]
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Time Zone
Set the time difference from GMT. Choose the nearest listed location from the list. If you select a
region that utilizes summer time, configure settings for summer time.
Setting Date and Time (page 2-35)
Item Description
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
For setting the time until the panel is automatically reset, refer to the following:
Panel Reset Timer (page 8-8)
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [Auto Panel Reset] is set to [On].
Low Power Timer
Set amount of time before entering the Low Power mode.
Value: 1 to 120 minutes (1 minute increments)
Low Power Mode (page 2-46)
Sleep Timer
Set amount of time before entering Sleep.
Value: 1 to 120 minutes (10 minutes increments)
Sleep Rules (models for
Europe)
*1
Select whether to use the Sleep mode for the following functions individually:
• Card reader
*2
• Application
Value: Off, On
If the sleep condition is not turned off, the ID card cannot be recognized.
Sleep Level (models
except for Europe)
*1
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep
mode.
Value: Quick Recovery, Energy Saver
Sleep Rules
Select whether to use the Energy Saver mode for the following functions individually:
• Card reader
*2
• Application
Value: Off, On
When the machine has entered sleep mode with Energy Saver setting, the ID card cannot
be recognized.
Item Description
To Next Page
Loading...
