Kyocera ECOSYS P4035dn

2P7/2R0/3PN
1-5-59
21. Remove the connector of the power
source fan motor wires.
22. Release three hooks using flat-blade
screwdriver and then remove the power
source fan motor assembly.
Figure 1-5-109
23. Stand the printer front side up.
24. Remove four screws each and then
remove the bottom plate 1 and the bot-
tom plate 2.
Figure 1-5-110
Hook
Connector
Power source
fan motor
assembly
Power source
fan motor wires
Hooks
Screw
Screw
Screw
Screw
Screw
Bottom plate 2
Screw
Screw
Screw
Bottom plate 1