Kyocera ECOSYS P6021cdn - Printing from Application Software; Printing by Airprint

Printing Operation
2-20
Printing from Application Software
The steps required to print a document created with an application are
explained below.
1 Load the paper required into the paper cassette.
2 From the application File menu, select Print. The Print dialog box
displays.
3 Select the printer to be used from the printer list.
4 Use Number of copies to enter the number of prints required.
5 To start printing, click OK.
Printing by AirPrint
AirPrint is a printing function that is included standard in iOS 4.2 and later
products, and Mac OS X 10.7 and later products.
This function enables you to connect and print to any AirPrint compatible
device without installing a printer driver.
To allow the machine to be found when printing by AirPrint, you can set
machine location information in Command Center RX.
For details, refer to the Command Center RX User Guide.
Note For information on how to use the printer driver software,
refer to Printer Driver User Guide.