What to do if Kyocera FS-1024MFP All in One Printer says 'Close front cover'?
If your Kyocera All in One Printer displays 'Close front cover', check if there is any cover which is open and close the cover indicated on the control panel.
Why are my Kyocera FS-1024MFP All in One Printer printouts fuzzy?
If your Kyocera All in One Printer printouts are fuzzy, it might be because the machine is being used in very humid conditions. Clean the charger wire.
Why are images skewed on my Kyocera FS-1024MFP?
If images are skewed on your Kyocera All in One Printer: * When placing originals on the platen, align them with the original size indicator plates. * When placing originals in the document processor, align the original width guides securely before placing the originals. * Check the position of the paper width guides to ensure the paper is loaded correctly.
How to improve print clarity on Kyocera FS-1024MFP All in One Printer?
To improve print clarity on your Kyocera All in One Printer, select the appropriate image quality for the original.
Why are there vertical streaks on my Kyocera FS-1024MFP prints?
If vertical streaks appear on your prints, it could be due to: * The inside of the machine may be dirty. Check the toner container and replace it if necessary. * Clean the charger wire. * Check the main charger cleaner of the drum unit is in its original position.
What to do if Kyocera FS-1024MFP All in One Printer ejects blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets: * When placing originals on the platen, place them face-down and align them with the original size indicator plates. * When placing originals in the document processor, place them face-up.
What to do if Kyocera FS-1024MFP All in One Printer says 'Add toner'?
If your Kyocera All in One Printer displays an 'Add toner' message, replace the toner container.
How to adjust print darkness on Kyocera FS-1024MFP?
To adjust print darkness on your Kyocera All in One Printer: * If the machine is in Auto Density mode, set the correct density level for auto density. * If the machine is in Manual Density mode, select the correct density level. * When changing the default density level, adjust the density manually and choose the desired level.
How to clean Kyocera FS-1024MFP dirty printouts?
To resolve dirty printouts on your Kyocera All in One Printer: * Clean the platen or the document processor if they are dirty. * Clean the charger wire.
Why does my Kyocera All in One Printer keep jamming paper?
If your Kyocera All in One Printer is experiencing frequent paper jams: * Ensure the paper is loaded correctly. * Check if the paper is of the supported type and in good condition. Try removing the paper, turning it over, and reloading it. * Make sure the paper isn't curled, folded, or wrinkled; if it is, replace it with new paper. * Check for and remove any loose scraps or jammed paper inside the machine.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 24 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 30, 000 pages |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 24 cpm |
| Connectivity | USB 2.0 |
| Copying | Yes |
| Maximum copy resolution | 600 x 600 dpi |
| Scanning | Yes |
| Optical scanning resolution | 600 x 600 dpi |
| Maximum scan area | 216 x 356 mm |
| Faxing | Yes |
| Standard input capacity | 250 sheets |
| Multi-purpose tray capacity | 50 sheets |
| Maximum input capacity | 300 sheets |
| Standard output capacity | 150 sheets |
| Maximum output capacity | 150 sheets |
| Internal memory | 64 MB |
| Product color | White |
| Maximum Paper Size | A4 |
| Functions | Print, Copy, Scan, Fax |
| Scan Type | Flatbed, ADF |
| Operating System Compatibility | Windows, Mac |
| Time to first copy (black, normal) | 12 seconds |
| Standard paper tray media types | Plain paper |
| Warm-up time | Less than 30 seconds |
To Next Page
