Kyocera FS-1040 - Page 65

5-13
Troubleshooting
Manual Feed Tray (FS-1060DN/FS-1061DN only)
Follow the steps below to clear paper jams in the Manual Feed tray.
IMPORTANT Do not try to remove paper that has already been partially fed. Refer to Rear Cover on page 5-9.
Note Do not open or close the front cover or rear cover before removing the jammed paper.
1
2
3
Remove the paper jammed at the
Manual Feed tray.
Reload the Manual Feed tray.
Press [GO] to clear the error and
the printer warms up and
resumes printing.