Kyocera FS-1118MFP

ADVANCED OPERATION GUIDE Appendix-3
Paper Size
Cassettes and an MP tray are available for the paper sizes listed in the table below.
The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width.
The angle at the corners must be 90° ±0.2°.
Smoothness
The paper should have a smooth, uncoated surface. Paper with a rough or sandy
surface can cause voids in the printed output. Paper that is too smooth, however, can
cause multiple feeding and fogging problems. (Fogging is a gray background effect.)
Paper Feed
Source
Paper Size Dimensions
Cassette or MP
Tray
Letter 8 1/2 × 11 inches
Legal 8 1/2 × 14 inches
ISO A4 210 × 297 mm
ISO A5 148 × 210 mm
JIS B5 182 × 257 mm
Folio 210 × 330 mm
Oficio II 8 1/2 × 13 inches
Executive 7 1/4 × 10 1/2 inches
ISO B5 176 × 250 mm
16K 197 × 273 mm
MP Tray only Statement 5 1/2 × 8 1/2 inches
ISO A6 105 × 148 mm
JIS B6 128 × 182 mm
Envelope #10 4 1/8 × 9 1/2 inches
Envelope #9 3 7/8 × 8 7/8 inches
Envelope
Monarch
3 7/8 × 7 1/2 inches
Envelope #6 3 5/8 × 6 1/2 inches
Envelope DL 110 × 220 mm
Envelope C5 162 × 229 mm
Hagaki 100 × 148 mm
OufukuHagaki 148 × 200 mm
Youkei 2 114 × 162 mm
Youkei 4 105 × 235 mm
Custom 80 to 216 mm × 148 to 356 mm (3.15 to
8.50 inches × 5.83 to 14.02 inches)