EasyManuals Logo

Kyocera FS-1350DN User Manual

Kyocera FS-1350DN
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #157 background imageLoading...
Page #157 background image
7-60 Using the Operation Panel
SSL Server (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt
information sent and received over a network. SSL can currently be used
to encrypt data such as the WWW or FTP files widely used on the
Internet so that privacy-related information, credit card numbers,
corporate secrets and other confidential information can be sent and
received safely.
SSL servers use this protocol to authenticate servers and clients.
The default setting is Off.
1 After entering the administrator ID and password, press U or V
repeatedly until >SSL Server > appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
DES (SSL Server DES setting)
DES (Data Encryption Standard) is a typical symmetric-key
cryptographic algorithm that divides data in to 64-bit blocks and then
encrypts each block using a 56-bit key.
The default setting is Off.
1 Press Z while >SSL Server On > is displayed. >>DES appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Note Check with your network administrator when selecting
network settings.
>SSL Server >
>SSL Server
? Off
Note Symmetric-key cryptography, because it uses the same key
for both encryption and decryption, uses the same key in both
directions when encrypted data is exchanged. Accordingly, to
prevent the key from being divulged, key transfer and storage must
be very strictly managed.
>>DES
? Off

Table of Contents

Other manuals for Kyocera FS-1350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1350DN and is the answer not in the manual?

Kyocera FS-1350DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Processor modelPowerPC–440F5
Maximum internal memory1152 MB
Sound power level (standby)30 dB
Sound pressure level (printing)54 dB
Power supply typeAC 220 - 240 V, 50/60 Hz
Capacity cartridge7200 sheets
Standard media sizes(105 x 148 - 216 x 297 mm)
Power consumption (active)484 W
Compliance industry standardsTUV/GS, CE
Number of print cartridges1
Total input capacity250 sheets
Maximum input capacity800 sheets
Maximum print size216 x 356 mm
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Power consumption (standby)12 W
Power consumption (PowerSave)7.1 W
DisplayLCD
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)375 x 393 x 267 mm

Related product manuals