Introduction
ix
The manufacturer and its merchandising companies retain the following technical docu-
mentation in anticipation of the inspection that may be conducted by the authorities con-
cerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
KYOCERA ELECTRONICS EUROPE GmbH
Mollsfeld 12
40670 Meerbusch, Germany
Phone: +49 21 59 918 0
Fax: +49 21 59 918 100
Declaration of Conformity (Australia)
Manufacturer's name: Kyocera Corporation, Printer Division
Manufacturer's address:
2-14-9 Tamagawadai, Setagaya Ward, Tokyo 158-8610, Japan
declares that the product
Product name: Page Printer
Model number: FS-1750/FS-3750 (as tested with enhancement optional
units:
EF-1, PF-21, DU-21, HS-21 and ST-20 etc.)
Description of device: This Page Printer Model FS-3750 is the 18ppm (FS-1750 is the
14ppm); A4 size and utilized plane paper; laser; dry toner etc. The printer can be equipped
with several enhancement optional units as a paper feeder as PF-21, a duplexer as DU-21,
a sorter as ST-20 etc.
Conforms to the following product specifications.
AS/NZS 3548: 1995
(EN 55 022:1994 Class B, if operated without PF-7E and without HS-3E)
(EN 55 022:1994 Class A, if operated with PF-7E and with HS-3E)
IEC60950 (EN 60 950:1992+A1+A2+A3+A4)
IEC60825-1 (EN 60 825-1:1994+A11)
The manufacturer and its merchandising companies retain the following technical docu-
mentation in anticipation of the inspection that may be conducted by the authorities con-
cerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information.
To Next Page
Loading...
