Introduction
xi
Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from
the wall outlet.
We recommend you consult with your dealer about the additional actions you should take
to avoid possible damages that may occur when the printer is used next time.
Moving the Printer
When you move the printer:
❒ Move it gently.
❒ Keep it as level as possible, to avoid spilling toner inside the printer.
❒ If you need to move the printer to another location, first remove the toner container,
waste toner bottle, and developer unit. After removing the developer unit from the
printer, put it into the supplied plastic bag and place it into the box in which the toner
container is packaged. Make sure that the waste toner bottle is securely capped and
place it in the plastic bag together with the toner container. Be sure to consult a service-
man before attempting long-distance transportation of the printer.
(1) Remove the developer unit. (2) Close the protect cover. (3) Pack the developer unit.
To reinstall the developer unit in the printer, use the reverse procedure of the above.
Protect cover
Toner container box
Plastic bag (supplied)
1. Disconnect
2. Push
Developer unit
To Next Page
Loading...
Need help?
General
