Kyocera FS-1750 - Configuring Interfaces; RAM DISK Setup; Operating a Memory Card

2. Unpacking and Inspection
4
List of Shipped Components
❒ (A)Face-up Output Tray (FS-3750 only)
❒ (B)Toner Kit (Box for the Developer Unit)
❒ (C)Power Cord
❒ (D)Installation Manual and Kyocera Digital Library (CD-ROM), including the printer drivers
and manuals.
❒ (E)Paper Stopper (FS-3750 only)
To remove the printer from the box, grasp the handholds on either side of the printer. Lift
the printer from the carton as shown below.
☛
‹ Always use these handholds whenever
you lift or move the printer.
‹ The handhold on the right side of the
printer doubles as the memory card slot.
Be sure to remove the memory card first,
if inserted, before lifting or moving the
printer.
2
Printer
(D)
(C)
1
(A)
(B)
(E)