2F8/2F9/2GA-2
1-3-4
Service items Description
Code conversion
ABCDEF GHI J
0123456789
No. Items Description
Engine ROM information [Flash ROM version]
Operation panel ROM infor-
mation
[Operation panel mask ROM version]
Boot ROM information [Boot ROM version]
Software jumper switch
information
(hexadecimal)
[First byte/Second byte
(displayed in OEM model
only)]
First byte
bit 0 = 1: (Fixed)
bit 1 = 0: Overseas, 1: Domestic (Japan)
bit 2, 3 (Not used)
bit 4 = 0: Kyocera, 1: OEM
bit 5 = 0: For Europe, 1: For US
bit 6 = 0: Non MICR mode, 1: MICR mode
bit 7 (Not used)
Second byte: Displayed in OEM model only
Tota l pa g e -
Toner install information -
Parallel I/O information -
Serial information 00: Not connected
bit0: Framing error
bit1: Overrun error
bit2: Parity error
USB information 00: Not connected
01: Full-Speed
02: Hi-Speed
Operation panel lock sta-
tus (displayed only when
locked)
01: Partial lock
02: Full lock
NVRAM error (displayed
only when any error has
occurred)
01: ID error
02: Version error
03: Checksum error
04: NVRAM crush error
NVRAM download 00: Normal
bit0: Font data
bit1: Host data
bit2: Macro data
bit3: Program data
bit4: Operation panel message data download (file name displayed)
bit5: OEM data
bit6: Web template data (version displayed)
bit7: Error occurred
Printable area setting /Top offset/Left offset/Page length/Page width
Left offset for each paper
source
/MP tray/Paper cassette1/Paper cassette 2/Duplex
(1/600 inches unit)
Top offset for each paper
source
/MP tray/Paper cassette 2/Duplex
(1/600 inches unit)
Offset for rotation /Top offset/Left offset/
(1/600 inches unit)
Paper source life counter /MP tray/
Paper source life counter /Cassette 1 total/Paper feeder 1 (cassette 2) total/
To Next Page
Loading...
