Device Settings
Removing a Plug-in
You can remove an installed plug-in from the driver. When removed, the plug-in
features will not appear in the driver interface.
1
In the Device Settings tab, click the Kyocera logo to open the About dialog
box.
2
Click Plug-in to open the Plug-in Information dialog box.
3
Select a plug-in module from the list and click Delete, then Yes.
4
Click OK in all dialog boxes.
Note: To remove the Output to PDF module, PDF must not be selected in
the PDL Settings dialog box.
User Guide
2-15
To Next Page
Loading...
