Kyocera FS-3040MFP

3
3-13
Basic Operation
The procedure for using two-sided/duplex copying is explained below.
1 Press the Function Menu key. Function Menu appears.
2 Press the U or V key to select [Duplex].
3 Press the OK key. Duplex appears.
4 Press the U or V key to select the desired duplex
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
finished copies and the original setting orientation.
After pressing the OK key, select the binding edge of the
finished copies and the original setting orientation.
If you select [2-sided>>1-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
original and the original setting orientation.
After pressing the OK key, select the binding edge of the
original and finished copies, and the original setting
orientation.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection T
Duplex: a b
*********************
2 1-sided>>2-sided
3 2-sided>>1-sied
1 *1-sided>>1-sided
Finish. Binding: a b
*********************
2 p Top
1 * o Left/Right
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge left
Orig. Binding: a b
*********************
2 p Top
1 * o Left/Right
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge left
Downloaded From ManualsPrinter.com Manuals