12
(Note: SMTP settings must be configured as described in section 7.2 for this feature to work.)
13. Press ‘Save to USB’ to save the results to a USB flash drive. (Note: USB drive must be inserted in
the copier PRIOR to pressing the Save to USB button. After the files are saved, the drive must be
‘cleanly-ejected’ by pressing the ‘Remove’ button on the Job Status/cancel screen Removable
Memory tab.)
Changing Grade Letter Percentages
To temporarily change the percentage threshold for a grade letter, press the Option button prior to
grading the test. To make permanent changes, refer to section on Configuring Grading Application.
To Next Page
Loading...
