103
Care and Maintenance
4
Reinsert the media cassette into the printer; use adhesive tape to
secure the cassette to the printer.
5
If you have other media cassettes, repack them for shipping or
storage in their original shipping boxes.
6
(1) Open the printer’s front cover.
(2) Loosen the two thumbscrews by turning them counterclockwise.
(3) Turn the lower green lever 180° counterclockwise.
7
(1) Grasping the front green handle, slide the unit out until it
catches.
(2) Lift up the green handle on the left. Pull the imaging unit out of
the printer.
Important:
Do not touch the green surface (the right side) or the black belt (the under side).
Finger prints may affect the print quality.
Safety Caution:
The imaging unit weighs approximately 6.5 kg (14 lbs.). Always use the handles when
lifting it.
(3)
(1)
(2)
(2)
Green surface
Black belt
(2)
(1)
To Next Page
Loading...
