Envelopes
Envelopes should be fed in the face-up position, right edge first. Printing to envelopes can be
made only from the MP tray.
The printer can be adjusted to recognize the sizes of the following envelopes and special media
including the standard sizes:
To printer on these sizes, proceed as follows:
1
Set MP tray mode to “Cassette”. For details, see Operation Guide in the CD-ROM.
2
Select the paper size on the operation panel. (MENU key ¬ Paper Handling ¬ Mp tray
paper size). For details, see Operation Guide in the CD-ROM.
Some types of envelopes are not suitable for printing. For details on suitable types of envelopes,
see the Operation Guide contained as a PDF file in the Kyocera Mita Digital Library CD-ROM
supplied with the printer.
Tray Size Tray Size
A4 210 × 297 mm Hagaki 100 × 148 mm
Executive 7-1/4 × 10-1/2 inche OufukuHagaki 148 × 200 mm
Letter 8-1/2 × 11 inches Monarch 3-7/8 × 7-1/2 inches
Legal 8-1/2 × 14 inches Business 4-1/8 × 9-1/2 inches
Ledgerr 11 × 17 inches Commercial 9 3-7/8 × 8-7/8 inches
A3 297 × 420 mm Commercial 6-3/4 3-5/8 × 6-1/2 inches
JIS B4 257 × 364 mm ISO DL 110 × 220 mm
ISO C4 229 × 324 mm ISO C5 162 × 229 mm
Oficio II 8-1/2 × 13 inches A6 105 × 148 mm
Statement 5-1/2 × 8-1/2 inches JIS B6 128 × 182 mm
Folio 210 × 330 mm A5 148 × 210 mm
Yokei 2 114 × 162 mm JIS B5 182 × 257 mm
Yokei 4 105 × 235 mm ISO B5 176 × 250 mm
Test a sample envelope on the printer and check that printing quality is satisfactory
before purchasing.
To Next Page
Loading...
Need help?
General
