Top Page > Getting Started > Placing Originals > Placing Originals > Placing originals on the exposure glass
Placing originals on the exposure glass
The exposure glass enables you to scan and send documents that cannot be fed into the ADF.
● Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
Lift the ADF.
Be careful not to hold the input tray when lifting the ADF, for the tray might be damaged.
Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Lower the ADF.
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
To Next Page
Loading...
