Kyocera FS-C1020MFP

Top Page > Configuring the Machine Using the Control Panel > Reports Print > Reading the Configuration Page
Reading the Configuration Page
Device Info
● Model Name
Shows the machine model name.
● Serial Number
Shows the serial number assigned to the machine by the manufacturer.
● Memory Size
Shows the total amount of memory installed on the machine.
● Firmware Version
Shows the version of the machine's firmware.
● Engine FW Version
Shows the version of firmware for the machine engine.
Tray Info
“Tray 2” appears only when it is installed.
● Bypass Tray
Shows paper size and type settings.
● Tray 1
Shows paper size and type settings.
● Tray 2
Shows paper size and type settings.
Supplies Info
Shows the information about supply levels.
● Black Toner
● Magenta Toner
● Yellow Toner
● Cyan Toner
● Waste Toner Bottle
Counter Info
● Total Mode
● Print Mode
● Scan Mode
● Fax Mode
● Copy Mode
● Both Sides
Network Info
Shows the settings for the following items:
● MAC Address
● Network Speed
● TCP/IP
Contents Previous Next Settings