Top Page > Getting Started > Installing the Machine > Turning the Power on
Turning the Power on
This section describes how to turn on the machine.
● Plug and unplug the power cable with dry hands, or an electric shock could occur.
● Make sure that the power cord is plugged securely into the wall outlet before turning the power on.
● Make sure that the power is off when plugging or unplugging the power cord.
● Do not turn off the power switch until initializing is completed. Doing so results in malfunction.
Plug in the power cord.
Turn the power switch to ” On”.
The [Copy] key on the control panel lights up.
● Depending on the [Default Mode] setting under [Admin Settings], the [Facsimile] key may light up instead of the [Copy]
key.
● The machine may make a noise while initializing. This noise does not indicate a malfunction.
● To turn off the power, turn the power switch to “ Off”.
Contents Previous Next Settings
To Next Page
Loading...
