Top Page > Using the Printer Function > Basic Operation in Printer Mode > If a Paper Mismatch Occurs
If a Paper Mismatch Occurs
If the paper size or type does not match the print job's settings, the machine reports an error. There are
two ways to resolve this error:
Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched paper.
Reset the print job
Cancel printing.
● If the [Auto Continue] setting under [Machine Settings] is enabled, the machine ignores the paper type and size
settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts
automatically after ten seconds.
● For details about [Auto Continue], see Machine Settings .
Related topics
Continuing printing using mismatched paper
Resetting the print job
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
To Next Page
Loading...
