Kyocera FS-C1020MFP

Top Page > Using the Copier Function > Making Enlarged or Reduced Copies
Making Enlarged or Reduced Copies
This section describes how to specify the reduction or enlargement ratio for the current job.
Scaling
There are two ways to set the scaling ratio: using a preset ratio or manually specifying a customized
ratio.
● Preset ratio
50%, 65%, 78%, 93%, 129%, 155%, 200%, 400%
50%, 71%, 82%, 93%, 122%, 141%, 200%, 400%
● Custom ratio
25% to 400% in 1% increments.
Use this procedure to specify the reduction or enlargement ratio for the current job.
Press the [Reduce/Enlarge] key.
Press the [Reduce/Enlarge] key or [ ][ ] keys to select the desired ratio, and then
press the [OK] key.
If [Custom 25-400%] has been selected, specify the desired ratio using the number
keys, and then press the [OK] key.
Contents Previous Next Settings