Top Page > Using the Copier Function > Making 2-sided Copies
Making 2-sided Copies
This section describes how to set the machine to make 2-sided copies by copying single-sided documents
onto the front and back sides of the paper.
● This function is only available when the original is set in the ADF, not when it is set on the exposure glass.
● Paper must be fed from tray 1 or tray 2, not from the bypass tray.
● The paper size must be A4, B5, Letter, Legal, or Executive.
● The paper type must be thin, plain, recycled, color, preprinted or prepunched.
There are two copy orientation options:
Top to Top
● Portrait
● Landscape
Top to Bottom
● Portrait
● Landscape
Use this procedure to set the machine to make 2-sided copies.
Contents Previous Next Settings
To Next Page
Loading...
