Top Page > Configuring the Machine Using the Control Panel > Basic Operation Using the Menu Screen
Basic Operation Using the Menu Screen
This section describes the basic procedure for specifying and changing the machine's settings.
If you want to configure the machine's system settings, press the [User Tools] key. If you want to
configure the settings of machine's current operation mode, press any menu key.
The procedure for changing the copy quality setting is provided as an example.
Press the [Copy] key.
Press any menu key.
Press the [ ][ ] keys to select [Quality], and then press the [OK] key.
Copy Settings
Quality
Press the [ ][ ] keys to select the document type of the original, and then press the
[OK] key.
Quality
Text *
The new setting is displayed with a “ ” symbol, indicating that the setting has been changed.
Confirm the setting, and then press the [ ] key.
Press the [Clear/Stop] key to return to the initial screen.
● You can press the [ ] key to exit to the previous level of the menu tree.
Contents Previous Next Settings
To Next Page
Loading...
