Top Page > Configuring the Machine Using the Control Panel > Fax Transmission Settings > Changing Fax Transmission Settings
Changing Fax Transmission Settings
The procedure for setting the resolution for scanning the original is provided as an example.
Press the [Facsimile] key.
Press any menu key.
Press the [ ][ ] keys to select [Resolution], and then press the [OK] key.
TX Settings
Resolution
Press the [ ][ ] keys to select the desired resolution, and then press the [OK] key.
Resolution
Standard*
The new setting is displayed with an “ ” symbol, indicating that the setting has been changed.
Confirm the setting, and then press the [ ] key.
Press the [Clear/Stop] key to return to the initial screen.
● You can press the [ ] key to exit to the previous level of the menu tree.
Top Previous Next
Contents Previous Next Settings
To Next Page
Loading...
