Kyocera FS-C1020MFP

● Duplex
Sets the machine to print on both sides of paper according to the specified binding method.
Default: [Off]
❍ Off
❍ Long Edge Bind
❍ Short Edge Bind
● Blank Page Print
Sets the machine to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets are inserted even if
you select [No Print].
Default: [Print]
❍ Print
❍ No Print
● B&W Page Detect
Sets the machine to print all monochrome pages in monochrome mode even if color printing is
specified.
Default: [Off]
❍ On
❍ Off
● Print Error Page
Sets the machine to print an error page when the machine detects an error.
Default: [Off]
❍ On
❍ Off
PCL Menu
Specifies conditions when using PCL for printing.
● Orientation
Specifies the page orientation.
Default: [Portrait]
❍ Portrait
❍ Landscape
● Form Lines
Specifies the number of lines per page.
Default:
60, 64
❍ 5 to 128, in increments of 1
● Font Number
Specifies the ID of the default font you want to use.
Default: 0
❍ 0 to 89
● Point Size
Specifies the point size for the default font.
This setting is effective only for a variable-space font.
Default: 12.00 points
❍ 4.00 to 999.75, in 0.25 increments
● Font Pitch