Kyocera FS-C1020MFP

Top Page > Configuring the Machine Using Web Browser > Configuring the Network Settings > Configuring the SNMP Settings
Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP settings.
SNMP Setting
Item Description
SNMP
Select whether to enable the machine to use SNMP services.
Trap
Item Description
Target Trap
Select whether to enable the machine to send traps to the management host (NMS).
SNMP Management Host 1
Enter the IP address or host name of a management host. Can contain up to 32
characters.
SNMP Management Host 2
Enter the IP address or host name of a management host. Can contain up to 32
characters.
Community
Item Description
Get Community
Enter the community name to use for authentication of Get requests. Can contain up to 32
characters.
Trap Community
Enter the community name to use for authentication of Trap requests. Can contain up to 32
characters.
System
Item Description
Contents Previous Next Settings