Top Page > Configuring the Machine Using Web Browser > Configuring the Administrator Settings > Restoring the Machine's Settings from
a Backup File
Restoring the Machine's Settings from a Backup File
Click the [Restore Settings] tab on the administrator settings page to restore the machine's settings from a
previously created backup file.
● When the machine is returned from repair, it is important that you restore the machine's settings from the backup files. The
machine's settings are returned to the default after repair.
Restore Settings
Item Description
Select file to restore
Enter the name of the file to restore, or click [Browse] to select the file.
Follow the procedure below to restore configuration backup files.
Click [Setting Restore].
Click [Browse].
Navigate to the directory containing the backup file to restore.
Select the backup file, and click [Open].
Enter the administrator password if required.
Click [Submit].
● If the setting are not restored successfully, an error message appears. Try again to restore the file completely.
Contents Previous Next Settings
To Next Page
Loading...
