The printed paper is curled.
● Load the paper upside down in the paper tray.
● If the paper curl is severe, take prints from the output tray
more frequently.
● Paper is damp. Use paper that has been stored properly. See
Paper and Other Media .
● Select [Mode2] or [Mode3] in the [High Humidity Mode] under
[Machine Settings]. Note that if you select [Mode2] or
[Mode3], the first print takes longer than subsequent prints to
complete.
Images are printed diagonally to the pages.
If there are gaps between the paper and the paper guides, adjust the
paper guides to remove the gaps.
Related topics
Removing Printing Jams
Removing Scanning Jams
Top Previous Next
Copyright © 2009
To Next Page
Loading...
