Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Copier > Making 2-sided copies
Making 2-sided copies
You can make 2-sided copies by copying single-sided documents onto the front and back sides of the
paper.
● This function is only available when the original is set in the ADF, not when it is set on the exposure glass.
Change the machine's default setting to apply 2-sided copying.
Preparation for making 2-sided copies
1. Configure the [Duplex Copy] setting under copy settings.
For details, see
Making 2-sided Copies .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
To Next Page
Loading...
