Pass the telephone line cord through the opening in the cable cover.
Hook the tabs of the cable cover into the openings of the machine.
Attach the cable cover in place.
● After connecting the machine to the telephone line, configure the telephone network settings and fax reception mode.
● If your telephone has functions that are not compatible with this machine, those functions will not be usable.
● Confirm that you have registered user fax number and user name during Initial Setup. You can check the registered
information in [User Settings] under [Admin Settings].
● For details about registering fax sender information, see Administrator Settings .
● For details about configuring the telephone network settings, see Configuring Telephone Network Settings .
To Next Page
Loading...
