Kyocera FS-C2126MFP User Manual

Setup and Registration
6-14
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
Part that is operated
1 Refer to Basic Operation Procedure on page 6-7.
2 Press the U or V key to select [FAX Media Type].
3 Press the OK key.
4 Press the U or V key to select the desired paper
type. If you do not specify any paper type, select
[All Media Type].
5 Press the OK key.
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1 Refer to Basic Operation Procedure on page 6-7.
2 Press the U or V key to select [Orig./Paper Set.].
3 Press the OK key.
4 Press the U or V key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
Reception: a b
*********************
2 Rings(Normal)
3 Rings(TAD)
[ Exit ]
1 FAX Media Type
FAX Media Type:
a b
*********************
2 Plain
3 Rough
1 *All Media Type

Kyocera FS-C2126MFP Specifications

General

Technology	Laser
Printing color	Color
Max. print resolution	600 x 600 dpi
Max. print speed (B/W)	26 ppm
Max. print speed (color)	26 ppm
Duplex printing	Yes
Max. paper size	A4
Display	Yes
Display type	LCD
Copier function	Yes
Scanner function	Yes
Fax function	Yes
Standard interfaces	USB 2.0, Ethernet
Fax Transmission Speed	33.6 kbps
Type	Multifunction
Connectivity	Ethernet, USB