Kyocera FS-C5020N User Manual

Using the Operator Panel
ADVANCED OPERATION GUIDE 2-81
8
Once all data has been received, the message Waiting will appear.
Press [GO] to finish hex-dump printing.
Printer Resetting
The procedure described below resets the printer’s temporary conditions,
such as the current page orientation, font, etc., set by commands to their
default values. Downloaded fonts and macros are deleted from the
printer’s memory.
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until >Restart
Printer appears.
5
To reset the printer, press [OK] ([ENTER]).
A question mark (?) appears.
6
Press [OK] ([ENTER]) again. Self test
appears while the printer is resetting itself,
followed by Please wait and then Ready.
Others >
>Restart
Printer
>Restart
Printer?
Self test
Please wait
Ready

Kyocera FS-C5020N Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Monthly Duty Cycle (Max)	30, 000 pages
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac OS, Linux
Display	LCD
Processor	400 MHz
Print Speed (Color)	20 ppm
Print Speed (Black)	20 ppm
Duplex Printing	Automatic
Media Type	Labels
Media Sizes	Letter, Legal, A4, A5, B5