2HL/2HM/2HN
1-3-9
Developer refreshing
Description
The laser output of the image data for developer refreshing is carried out, and operation to
exposure, developing, and primary transfer is performed by 10 pages. (Paper is not fed)
Purpose
To perform when occurring the decrease of image density or the developing problem.
Procedure
1. 1. Enter the service mode [>>DEV-CLN].
2. 2. Press the OK key. [>>DEV-CLN?] will be displayed.
3. 3. Press the OK key. Developer refreshing will be started.
Completion
Figure 1-3-4Developer refreshing Image data
LSU dust shield glass and main charger cleaning
Description
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Purpose
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Procedure
1. Enter the service mode [>>LSU/Charger].
2. Press the OK key. [>>LSU/Charger?] will be displayed.
3. Press the OK key. LSU dust shield glass and main charger cleaning will be started.
Completion
Service items Description
>>DEV-CLN
A4 paper size
200 mm
33 mm
Toner image on the primary transfer belt
>>LSU/Charger
To Next Page
Loading...
Need help?
General