Wireless Stereo Headset 9
Listening to music on your
computer
When listening to music you should connect to the
Music (AV) profile.
Note: If you try to use a profile that was created for
making Internet phone calls (see “Making Internet
phone calls” on page 9) to listen to music, the
stereo function of the headset will be lost, resulting
in poor sound quality.
The example below describes how to use the
headset with Windows Media Player™.
1. To turn on the headset, long-press until
the LED flashes blue.
2. If the Bluetooth Settings utility is not open,
double-click the Bluetooth Manager icon in
the system tray (fig 21).
3. Right-click the GSH300 icon and click Connect.
Once connected, the icon changes to a
handshake (fig 22).
4. Open and start playing a playlist on Windows
Media Player. (You can also press
IN to open
Windows Media Player.)
– Press on the headset to adjust
the volume
– Press IN to toggle play/pause
– Press DOWN to play the next song
– Press UP to play the previous song
– Long-press IN to stop playing; short-
press to resume play
5. To turn off the headset, long-press .
Note:
You can use the headset to listen to other
music players on your computer. However, other
players may not support the 3-way button .
Music functions at a glance
Making Internet phone calls
There are many Internet phone services (VoIP) that
let you make calls from your computer. Because
Internet calling uses a different profile than the one
set up for music, you must add a new connection
for this function.
Function... Press...
Open Player
IN
Play
IN
Pause/play
IN
Stop
Long-press IN
Next song
DOWN
Previous song
UP
To Next Page
Loading...