2-3
2. Windows XL Driver
2-2-1 Custom Media Size dialog box
■ Setting a custom paper size
Perform the following procedure in order to register a custom size when you want to print onto a non-standard size of paper. The
information registered here will be displayed under the “Page Size” setting in the Media Tab as well as in the Paper Size setting of your
application.
1
2
3
4
Select the desired unit of measurement in the “Units” block and the desired dimen-
sions of the paper in the “Size” block.
<Available settings>
Units: “Inches” or “Millimeters”
Height: 5.83 - 14.00 [Inches]
148.1 - 355.6 [Millimeters]
Width: 3.88 - 8.50 [Inches]
98.4 - 215.9 [Millimeters]
Type into the “Name” field the name you want to use for this custom size of paper.
* It is the name that you register here that will actually be displayed under the “Page
Size” setting.
Click on the “Save” button.
* The “Save” button will change to the “Delete” button when you are deleting a me-
dia size that is already registered, and to the “Rename” button when you are changing
the name of a registered media size.
Click on the “OK” button.
To Next Page
Loading...
