5-6
5. Printer Driver for Windows2000
5-4-4 Printer Features
■ Eco print:
Saves on toner. The factory default setting is “Off”.
■ Edge Smoothing:
Turning this setting “On” allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing
process.
■ PagePolicy: (only available with KPDL2 Driver)
Perform this setting in conjunction with the settings to be made under “Paper Source” on page 5-3.
[Auto Size Select] ......................Select this setting when you want to select “Automatically Select” under “Paper Source”.
[Cassette Base] .........................Select this setting when you want to select the source of paper feed according to the tray under
“Paper Source”.
* If you are going to select “Automatically Select” under “Paper Source”, be sure to select “Auto Size Select” here or there is a possibility
that printing will be accomplished onto paper that is difference the expected.
■ Job Spooling:
Allows you to select whether to sort the copies in the case of multiple copy.
[None]........................................ Does not sort.
[Temporary] ..............................Prints in the order of 1st, 2nd, 3rd copies and so on.
* If you are using a KPDL2 Driver, it is necessary to create a RAM disk. (Refer to page 5-8.)
* If you are using a Universal driver, it is necessary to increase the memory capacity of your printer and then change the “Memory” setting
to more than 24 MB. (Refer to page 5-8.)
To Next Page
Loading...
