Kyocera KM-2810 - Page 35

2H9-3
1-3-9
U000
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
No. Items Description
(5) Maintenance Log # Count. Item
Remembers 1 to 8 of
occurrence of replace-
ment. If the occurrence
of the previous replace-
ment of toner container
is less than 8, all of the
occurrences of replace-
ment are logged.
The total page count at
the time of the replace-
ment of the toner con-
tainer.
Code of maintenance
replacing item (1 byte,
2 categories)
First byte
(Replacing item)
01: Toner container
02: Maintenance kit
Second byte
(Type of replacing item)
00: Black
01: MK-130/MK-132
(6) Unknown Toner Log # Count. Item
Remembers 1 to 5 of
occurrence of unknown
toner detection. If the
occurrence of the previ-
ous unknown toner
detection is less than 5,
all of the unknown
toner detection are
logged.
The total page count at
the time of the [Toner
Empty] error with using
an unknown toner con-
tainer.
Unknown toner log
code (1 byte, 2 catego-
ries)
First byte
01: Fixed (Toner con-
tainer)
Second byte
00: Fixed (Black)
(7) Counter Log
Comprised of three
log counters includ-
ing paper jams, self
diagnostics errors,
and replacement of
the toner container.
(f) Paper jam (g) Self diagnostic error (h) Maintenance item
replacing
Indicates the log coun-
ter of paper jams
depending on location.
Refer to Paper Jam
Log.
All instances including
those are not occurred
are displayed.
Indicates the log coun-
ter of self diagnostics
errors depending on
cause. (See page 1-4-
3)
Example:
C6000: 4
Self diagnostics error
6000 has happened
four times.
Indicates the log coun-
ter depending on the
maintenance item for
maintenance.
T: Toner container
00: Black
M: Maintenance kit
00: MK-130/MK-132
Example:
T00: 1
The toner container has
been replaced once.