2H9-1
1-3-49
U903
Checking/clearing the paper jam counts
Description
Displays or clears the jam counts by jam locations.
Purpose
To check the paper jam status. Also to clear the jam counts after replacing consumable parts.
Method
1. Press the start key.
2. Select the item using the cursor up/down keys.
Method: Displays/clears the jam counts
1. Select [COUNT] and press the start key. The count for jam detection by type is displayed.
2. Change the screen using the cursor up/down keys.
3. To clear the counts for all, select [ALL CLEAR].
4. Press the start key. The count is cleared.
The individual counter cannot be cleared.
5. To return to the screen for selecting an item, press the stop key.
Method: Displays the total jam counts
1. Select [TOTAL COUNT] and press the start key. The total number of jam counts by type is displayed.
2. Change the screen using the cursor up/down keys.
The total number of jam count cannot be cleared.
3. To return to the screen for selecting an item, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U904
Checking/clearing the service call counts
Description
Displays or clears the service call code counts by types.
Purpose
To check the service call code status by types. Also to clear the service call code counts after replacing con-
sumable parts.
Method
1. Press the start key.
2. Select the item. The screen for executing is displayed.
Method: Displays/clears the service call counts
1. Select [COUNT] and press the start key. The count for service call detection by type is displayed.
2. Change the screen using the cursor up/down keys.
3. To clear the counts for all, select [ALL CLEAR].
4. Press the start key. The count is cleared.
The individual counter cannot be cleared.
5. To return to the screen for selecting an item, press the stop key.
Method: Displays the total service call counts
1. Select [TOTAL COUNT] and press the start key. The total number of service call counts by type is dis-
played.
2. Change the screen using the cursor up/down keys.
The total number of service call count cannot be cleared.
3. To return to the screen for selecting an item, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
COUNT Displays/clears the jam counts
TOTAL COUNT Displays the total jam counts
Display Description
COUNT Displays/clears the service call counts
TOTAL COUNT Displays the total service call counts
To Next Page
Loading...
