Installation
Supported Browsers
Microsoft Internet Explorer 6 (with SP1) or 7. Cookies must be enabled.
Supported Printers
Kyocera network printers and most third party network printers that support
the standard printer MIB
Maximum Validated Configuration
Device Manager
Up to 2000 managed devices, 45 managed networks, 100 device groups,
and 10 simultaneous client connections
Accounting Manager
Up to 2000 managed accounts, and 10 simultaneous client connections
Print Job Manager
Up to 2000 print jobs per day and 10 simultaneous user connections
My Print Jobs
Up to 100 simultaneous user connections
Supported Languages
English, French, German, Italian, Japanese, Portuguese, Spanish
Host Agent for Print Job Manager
The Host Agent redirects the standard TCP/IP port to a managed KMSTLMON
port on the print server. The Host Agent also includes supporting software for
managing and unmanaging print queues. The Host Agent must be installed on
each print server.
Installing the Host Agent for Print Job Manager
You can install Host Agent from the application directory.
1
Run the Host Agent installer from C:\KMnet Admin\hostagent\Host Agent
Setup.exe.
2
On the Welcome page, click Next.
3
Continue until the installation wizard completes.
Select Configure Print Queues Now if you want to assign managed and
unmanaged queues. A managed queue is tracked in Print Job Manager and
My Print Jobs. Selecting this option launches the Host Agent after you exit the
installer. For more information about configuring queues, see the Print Job
Manager User Guide. To configure queues later, clear the check box.
4
To exit the installer, click Finish.
Maintaining Host Agent Features
If the Host Agent is already installed, and you run the Host Agent installation
program, a maintenance page appears letting you repair or remove Host Agent
features. Select one of the following options:
Repair
KMnet Admin 2.0
1-3
To Next Page
Loading...
Need help?
General
