3-15
Preparation
Quick Installer
In Quick Installer, the installer automatically detects the machine when it is turned on. Use Quick Installer for standard
connection methods. (The below screens show an example that the machine is connected to a computer via USB.)
1 Select Quick Installer.
2 Select USB Connection or Wireless Connection. The installer detects the machine.
If the installer does not detect a print system, check that the print system is connected via USB or a network and that it
is turned on.Then click (Refresh) to search print system again. Wireless Connection is only possible with the
MA2001w/MA2000w.
To Next Page
Loading...
