4-5
Copying
ID Card Copy
Use to copy the front and back sides of a license or other ID card on one sheet of paper.
1 Press the Function Select key to turn on the ID Card Copy Indicators.
2 Place the original. Align with the ID Card marks on the Original Size Indicator Plates.
For details, refer to Loading Originals on page 3-12.
3 Enter the number of copies. (Refer to Basic Operation on page 4-1.)
4 Adjust density. (Refer to Basic Operation on page 4-1.)
5 Press [Start] ( ). 1- appears in the display on the operation panel and the first side of the card is scanned.
After the first side is scanned, 2- appears in the display.
6 Turn the original over. Align with the ID Card marks on the Original Size Indicator Plates.
7 Press [Start] ( ). The front and back sides of the card are copied on one sheet of paper.
To Next Page
Loading...
Need help?
General