3-53
Preparation
Device Defaults Tab
No. Item Description
1 Power off timer Select the length of time before the machine shuts off automatically when not in use.
The default preset time is 3 days.
Value: 1 to 6 hours, 9 hours, 12 hours, 1 day to 1 week
• USB is connected: Selects whether or not to turn the power off automatically
when a USB is connected.
• Network is connected: Selects whether or not to turn the power off automatically
when a Network is connected.
2 Auto sleep Set the sleep timer for the machine to go into sleep mode when not in use. The default
preset time is 1 minute.
Value: 1 to 60 minutes (1 minute increments)
3Units Select Inches or Millimeters for the unit for paper dimensions.
4 Print density Adjust density using 5 levels.
Value: Light, Medium light, Normal, Medium dark, Dark
5 Panel options Opens Panel options screen.
• Default screen: Select the screen appearing right after
start-up (default screen).
Note To enable the change immediately, turn the
machine OFF and then ON. Otherwise wait until the
machine once enters the sleep and then resumes.
• Reset panel: If no jobs are run for a certain period of
time, automatically reset settings and return to the
default setting. If you select On for Reset panel, set the
amount of time to wait before Reset panel.
6 Auto error clear Enable auto error clear. If an error occurs during processing, processing stops to wait
for the next step to be taken by the user. In the auto error clear mode, automatically
clear the error after a set amount of time elapses.
If you select On for auto error clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (every 5 seconds)
To Next Page
Loading...
